Explosion proof solenoid valve is an electromagnetic valve device used under special environmental conditions. Its coil shell not only has the explosion-proof effect of withstanding gas explosion pressure, but also has a blocking effect on gas explosion energy transmission, with higher safety performance. It is a special electromagnetic valve used for transmitting flammable and explosive media or specifically for explosive hazardous areas.
The explosion-proof solenoid valve consists of a valve body and a control box, with the control box located at the upper end of the valve body. On the surface of the control box, there is a power indicator light, temperature sensor, signal amplification antenna, and reset switch. The box of the control box is equipped with a controller and an electromagnetic coil. The electromagnetic coil has a static magnet, and the lower side of the static magnet has a dynamic magnet. The lower end of the dynamic magnet is a secondary magnet, and the lower end of the secondary magnet is a piston pad.
The characteristic of explosion-proof solenoid valves is that the structure inside the valve body cavity is simple, and intelligent control and management of the equipment are achieved through the setting of controllers; Real time monitoring of the operating environment temperature of this device can be achieved through temperature sensors, ensuring stable operating conditions of the equipment; By setting a dredging port to remove impurities inside the valve body, it avoids the disassembly and installation of normal equipment, thereby reducing the risk of equipment failure.